Loop Catcher
- loop Catcher is designed for the catch of small, medium and large animals and their moves for minor distances.
Mobile tube in the middle zone is divided into two parts, interconnected by the collet lock. The collet lock is activated by the turn of the back of the inner moving pipe, which, like the steel case, the rubber handles are put on for the convenience and reliability of retention. When turning the back moving tube counterclockwise, the lock opens, and the inner tube decreases in diameter, and when the moving tube moves towards the steel case, the loop diameter increases. The loop diameter can be fixed in any intermediate position with the rotation of the back handle clockwise.
Operation on the release of an animal from the loop is performed manually by turning in opposite directions of handles located on the friend inserted In a friend of pipes, around the longitudinal axis. A significant simplicity of the design, without reducing the functionality, made it possible to increase the reliability and reduce the price of the product.
Dimensions of the device pl (loop Catcher):
- Length: 2000mm
- Pen length: 1230mm
- diameter Cases: 25mm
- Maximum loop length: 700mm
- Cable thickness: 6mm
Dimensions of the PZ device (animal capture device):
- Length: 2000mm
- Pen length: 1300mm
- Case diameter: 25mm
- Maximum loop length: 700mm
- Cable thickness: 6mm
device dimensions of the device (animal capture fixture):
- Length: 2150mm
- Pen length: 1550mm
- Case diameter: 22/32mm
- Maximum loop length: 550mm
- Cable thickness: 6mm