Module of 4 cells (polypropylene) 80381
- Module 80381 consists of two cell rows, lower high and upstairs smaller.
- in the top row one of the cells with a door for oxygenation .
Module 80381 consists of two rows of cells, downstairs high and upstairs smaller.
in the top row one of the cells with door for oxygenation.
In the bottom row between large cells there is a removable partition. If necessary, the partition can be removed, and two cells will be combined into one large.
cell walls are made of thick plastic (10 mm), resistant to any chemistry. The facade (door) is made of stainless steel.
The module is installed on the support frame of stainless steel, in which the wheels are in turn.
dimensions of the module 80381 without wheels and partitions: width 1500 mm, depth 500 mm, height 1400 mm. Lower range of cells height 800 mm, upper row 600 mm.
Cell depth is the same at the top and bottom.
Floor in cells is flat, without additional pallets.
Doors are fixed on stainless steel spring-loaded latches.
- Manufacturer part number:
- 80381
- Material:
- stainless steel + polypropylene
- Cells:
- non-removable
- Width, mm:
- 1500
- Length, mm:
- 500
- Height, mm:
- 1400
- Altura con ruedas, mm:
- 1555